This article will help you set up your QAM compliant TV at Sage. Before you scan for channels ensure that you have a QAM compliant TV. For more information about QAM television support check out the article linked below.

Digital Cable and TV Compatibility Information

Here's how it's done

Initiate a Channel Search

The channel search (a.k.a channel scan or auto program) function location varies by TV manufacturer and model. Consult your owner's manual for it's location.

Start by opening the menu for the TV with the menu button via the remote, or physically on the TV. Then look for Channel Setup, Channel Search, Auto Scan, or something similar and select it.

click photo to enlarge

If you see what mode to choose Antenna or Cable, choose cable mode, and always choose Digital channels only.

Initiate the scan, this may take several minutes. Once the search is done, exit the menu and use the channel up or down button to look for working channels.

Wrapping up

This article guided you through the process of scanning for digital channels on your TV at Sage. If you encountered issues ensure that your TV is QAM compliant. For more information about QAM television support check out the article linked below.

Digital Cable and TV Compatibility Information

Page:

How-To: Connect your streaming media device to Sage's Wi-Fi
Page:

How-To: Use Conference Room Kiosks
Page:

Digital Cable and TV Compatibility Information
Page:

How-To: Connect to Digital Cable

Here's how it's done

Initiate a Channel Search

Wrapping up

Related articles

Browser not supported