This setup has a black touch screen Crestron control panel. The control panel is usually located near the primary workstation in the room.
Table of Contents maxLevel 3 exclude Table of Contents
Starting the Crestron System
To turn on the Crestron system all you need to do is lightly press on the screen. The system will then boot up.
Column |
---|
click photo to enlarge |
Each classroom has a controller device that will
...
SLC B01 and 204 contain the same setup on the control panel.
Simply, Touch the screen to bring up the main page (if black, touch the screen firmly to "wake it up")
Column |
---|
click photo to enlarge |
From here, choose your device input. When selecting the Room PC option the system will display the video output from the computer workstation located in the podium. The Laptop option displays the external HDMI, VGA + Audio, or Component for an external video device. The Blu-ray Player option displays the video and audio output from the Blu-ray player located in the podium. Once your display option has been selected the projector will turn on, this may take a few moments.
Shutting down the system
When finished please ensure to shutdown the entire system. To shut down the system, press on the Power button located in the bottom right corner of the the touch panel. The following menu will appear, press Shutdown to turn the system off. This may take a few moments.
Column |
---|
click photo to enlarge |
Shea Learning Center - 201 Seminar Room
This room has the same functionality as B01 and 204, with the added bonus of being able to make and receive calls, and allows additional inputs from ports in the floor.
Column |
---|
click photo to enlarge |
Using the 201-Seminar Room phone
The SLC 201 Crestron Control Panel will operate the same way as the Crestron panels in B01 and 204, however, additional functionality is included in room 201 that enables the ability to make and receive calls. To make a call press the Phone icon on the Home screen.
Column |
---|
click photo to enlarge |
Once the Phone application has opened you will be presented with a number pad, and a few phone specific options. Enter in the number you wish to dial and press the Dial button to make your call, and the Hang Up button to end your call. If you have instructed someone to call the room you will need to use the Pick Up option when the call comes in. The Backspace and Clear buttons allow you to make changes to the phone number you're dialing. Backspace will delete the last number entered, and Clear will remove the entire number from the dialer.
...
Once you have finished with the system navigate to the Home (or main) menu, and tap the power button located in the bottom right hand corner. A new menu will pop up and give you the option to Cancel or Shutdown. Choose the Shutdown option to turn off the system.
Column |
---|
click photo to enlarge |
Related articles
Filter by label (Content by label) | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...